Pavement Barriers
The SUNKUT® cafe pavement barrier.
POSTS
Sunkut ® cafe pavement barriers are made with steel posts and base plate which is galvanised then powder coated black RAL 9005 or white RAL 9010, other RAL colours are available on application. The steel post including the base is 1020mm high and weighs 15 kilos.
CROSSBARS
The top crossbar is made from 25mm round galvanised steel, powder coated to match the posts. The bottom crossbar is aluminium and concealed in the bottom pocket which is attached to post rings with a carbine snap hook and bungee arrangement. The top crossbar clips to the post rings via an acetal resin snap hook.
BARRIER SCREENS
The pavement barrier is based on a width of 2m which is centre of pole to centre of pole though these can be cut down to bespoke sizes during manufacture if required. The 2m barrier would have a screen of approximately 1850mm wide x 800mm high complete with pockets and side hems (except for Soltis 86 which would be 1770mm with self sealed sides).
Post with base plate and screen attached via carbine snap hook and bungee arrangement.
The top crossbar is attached to post ring via an acetal resin snap hook.
Post with floor fixing flange via M8 Thunderbolts.
