The French Awning Spar Bracket

The spar bracket, a glass filled nylon components is capable of producing projections that are 50% longer than the back leg (ie 1m down the back allows up to 1.5m projection) keeping those savage cuts concealed.  When using a smaller projection, the tail of the spar can be trimmed to suit the application. 

The old way of producing an unequal spar .

The old way of fitting a spar to the bottom rail leaving the savage cut exposed on the spar.

After many years of making French Awnings with unequal cuts to the spars and always ending up with a savage cut on the end of the spar, Sunkut have designed the answer to address this unfinished look with this aesthetically pleasing French Awning Spar Bracket, also adding strength and preventing twisting. 

The NEW Sunkut Nylon French Awning Spar Bracket which not only holds the spar to the bottom rail but conceals the savage cut.

A perfect fit with the NFASB holding the spar and rail together.  The tail on the NFASB can be cut to size when small projections are used.